The new and improved Sailing For SOS

I am extremely proud to announce that the new permanent home of Sailing For SOS has gone live! You can view the new website at http://www.sailingforsos.com/. Please add it to your favorites as I will no longer be updating this blog. Blogger has served me well over the past few years, but as the scope and reality of the project have grown I’ve developed a new site to support the long term travel I’ll be undertaking.

Thanks Blogger. You’ve been great. Please stay with me as we make the transition to http://www.sailingforsos.com/. The latest blog highlights some of the new features of my new site. I hope you like it.

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

Climbing the mast and time.

Heights have never really bothered me, but I still get a little nervous climbing the mast on this boat.  When I am doing it solo I rig two safeties.  One is called an ascender and can be picked up from any store with rock climbing gear like an REI.  It has a spring loaded cam in it with teeth pointing in one direction.  It allows you to feed the line through the cam and slide it up.  As soon as any weight is put on the ascender the teeth bite into the line and prevent downward motion.  It forces you to open the cam and slide it down step by step on the way back down.  The second safety is much more low tech.  It is a simple piece of nylon webbing with two carabiners.  One is clipped into my climbing harness and the other is clipped either into the mast steps as I climb or around the mast itself once I reach the height I will be working at.

 

I just finished replacing every bulb and two complete housings for my running lights, tricolor, anchor, and spreader lights.  I tried plugging in some LED lights for the nav lights, but I didn’t like them at all.  They are not bright enough in all directions and you really have to be careful with the colors.  For instance, do not put the “white” bulb in your green bow light.  It turns it a distinctive shade of blue.  I am sure you could use a green light, but I think I am going to stick with the standard bulbs for the running lights.

 

I keep thinking about time.  I think I can be ready by the 10^th as long as I keep my head down, shut out all interactions with people, and basically turn into a boat maintenance hermit.  Sound like fun?  I haven’t spent any time with my family since last Thanksgiving and this trip will most likely keep me away for several holidays over the next few years.  I’d like to be able to take my time with a few more projects and also spend some time with my good friends and family.  If I look at the next full moon in December it will really take the pressure off to rush projects and get home before I leave.  I keep thinking I have to be through the Panama Canal by April to make the Pacific cruising season, but who says so?  I don’t really know how long I’ll want to explore the Central American coast so why put a time limit on it?

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

One great big step.

I’ve been stressing really bad all week.  The time had come for me to send in my resignation to my company, Thermo Fisher.  I’ve been working with them for over three years and it is in large part due to my success there that I have the funds to take a few years off to go sailing.  My boss and I still need to sort out some details, but he was initially very supportive.  My fear was that it would be taken badly as I’ve seen too many people get let go in a manner you wouldn’t believe.  However, since I am not going to a competitor, or even into a related market, all is well.

 

Lately I’ve been thinking about all the deadlines I’ve been driven by as well.  Even the countdown timer is a deadline that I’ve artificially imposed on myself.  Odds are I’ll be leaving in November, but it doesn’t really matter if it’s November 10^th or December 10^th.  What I suddenly have is a lot of time.  That is the exact opposite of where I’ve been for the last six years.  This evening will be spent unwinding a bit with two of my best friends from my days up in Washington State.  Here is to learning to relax and marking major milestones.  For the first time in my life I’ve chosen the route of greatest fulfillment instead of greatest financial benefit.  Let’s see where this goes….

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

Slow Going

Plugging away at projects with my friend, but it is slow going.  We got all the chain plate caps rebidded and spent the day working on my navigation lights.  Had to replace two fixtures which took the better part of the day.  Bigger news coming.

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

Updated Punch List

There are about two dozen projects not on this list, but these were the most critical at the start of last week.  Not bad progress.  Lots to go.

 

Cancel Slip – 30 Day Notice

Install flexible holding tank

Trace Alternator/Tach Problem

Change Engine impeller and spairs

Dremmel lip off the drop leaf bar

Oven security bar

Helm Mount the command mic (almost done)

Softwood plugs at through hulls

Pick up shackles for parell beads – Kemah Hardware?

Recaulk Chain Plates         (stripping old caulk)

Rebed rusty stanchions

Plumb the water tank deck plate

Replace lazy jack boom cleat

Hang lifeline netting

Install Exhaust Elbow and Prop Lock (at fab)

Install new opening ports (on order)

Get Windlass cover made

Put new 100% on the furler (on order)

Install cockpit speakers (on order)

Design foux potty spot for dog (have grommet kit and turf)

Order/design Ditch Bag – Landfall Navigation.com

Change compression washer and lube furler

Grease winches

Fix plug and anchor chain holder for windlass

Get gas, water, and diesel cans x2 each

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

Reinforcements are on the way.

Saturday was a hard day.  Yesterday was better.  Today is even better yet.  I am way behind on boat projects, but am steadily chipping away at them day after day.  I hardly answer my phone right now.  The storm jib is ready to fly, the water tank is plumbed, the holding tank is in and finished, the mount is ready for the VHF remote at the helm, and I am steadily pulling and cleaning all the chain plate caps for rebidding.

 

Two of my best friends, Jason and Center, are in town this week starting tomorrow.  I was a little worried at first that this would throw me even further behind schedule, but I am putting Jason to work with me during the days while Center is in class.  Jason rebuilt a Jeep and sailed with me to South Padre over New Years.  I know he can take on a few projects of his own this week without much input from me.  Plus it will make it much easier to pull the stanchion bases for rebidding and go aloft to change all the navigation light bulbs and mount the fixed radar reflectors.  Holy crap I’ve got a lot to do.

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

Not the best of days.

I woke up early this morning ready to start knocking out projects with a vengeance.  It’s now 5:30 and I’ve only managed to plumb the fresh water deck plate to the fresh water holding tank.  This should have been a 2 hour job, tops.  After getting all the parts I needed I got the hoses run without a hitch.  I then went to drill the hole for the new fresh water fill fitting and that’s when it all went bad.  I don’t know what kind of aluminum they used, but this stuff is impossible to drill.  I attacked with a dremel diamond bit, rigid hole saw, and finally a knock out bit.  In the end I ruined both bits and my drill getting the whole cut.  Not to mention an extra hour trying to clean up all the metal shavings in the bottom of my water tank.  I am worried they might shred the fresh water pump.  I’ll be adding a couple of extra spares.  I taped a bag under the hole in the tank, but the shavings were so hot they melted through and fell to the bottom of the tank anyway. 

 

Rarely, very rarely, I am surprised at how quickly some projects go.  More often, like today, what I estimate at a two hour project turns into a full day fiasco.  I am going to back off for the rest of the day and hope tomorrow brings better boat karma.  My boat looks like a prison cell that just got tossed.  What a mess.

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com

 

Shopping List

I’ve got to go get a bunch of random small parts to clean up a bunch of random small projects.  Here is the list of parts and associated poject I am going out for this morning.

 

1.       Galvanized carabiners – used to hank the storm jib over the furled headsail

2.       23 ¼ inch long x 1.5 or 2 inch stainless steel tubing and flat end caps – making a security bar at the stove

3.       3M 4000 sealant – for the chainplate caps and stanchion rebidding projects

4.       Teflon tape – I just always run out of this stuff.  Immediate need for engine zinc replacement

5.       Engine zincs – these are sacrificial anodes that wear away instead of eating up the engine

6.       Plumbing parts for water tank and hose – I can’t believe the deck plate isn’t plumbed to the water tank.  It just dead ends in mid air.

7.       Boom cleat for Lazy Jack line – Old plastic one broke

8.       Heavy Duty zip ties – A must have, like duct tape.  Need them for cleaning up the electrical harness and hanging my lifeline netting

9.       1/8 or 3/16 piece of teak – Have to make a mounting plate for a remote radio speaker and microphone for the VHF.  Can’t hear it in the cockpit.

10.   Teflon Grease to lube the FaMet Roller Furling compression washer.

 

Busy day, but the progress feels good.

 

Lee Winters
Skype: (281) 336-0855
Satellite Phone: 8816-316-59853
Email: Lee.Winters@SailingForSOS.com